c ommunications modules & subsystems key features ? protocol and data-rate independent, including 10 gbps/ oc-192 applications ? easily configurable as a booster or a pre/inline c-band amplifier ? four variants WRA-110, wra-113, wra-116, wra-119 to match specific application requirements ? constant signal gain mode configurable to 13 db (WRA-110) and to 26 db (wra-119) ? constant total output power mode configurable to 10 dbm (WRA-110) and to 19 dbm (wra-119) ? lo w p o w e r consumption and noise figure the waveready wra-1xx series are user-configurable, single-channel optical amplifiers that provide simple and economical c-band optical amplification for single-channel applications in a flexible, ready-to-use package. these erbium- doped fiber amplifiers (edfas) are network-ready and easily configured as a booster or as a pre/inline amplifier. the modules work by default in constant signal-gain mode, but they can be configured to constant total output-power mode. its ease-of-use and performance make the wra-1xx series the ideal solution for access and metro optical networks. front-panel light emitting diodes (leds) indicate module status, while integrated e le ctronics provide alarm and control functionality. d e plo y e d w ith a waveready communications module (com200), these units can be managed and configured remotely through tl1, snmp, or by using the w a veready node manager. local and remote management is performed through an rs232 o r e the r ne t port on the communications module. the module can be installed in a waveready 3500f or 3100 shelf mounted in 19- or 23-inch telecommunications racks. applications ? serves as a booster or pre/inline amplifie r ? use for access and metro optical networks ? works with point-to-point applications c ompliance ? telcordia nebs level 3 ? fd a class 1m laser device ? fcc class a device ? ul 60950-1 first edition ? can/csa c22.2 n o. 60950 01 ?e ? iec 60825-2 ? rohs (exemptions 7b, 8a) waveready ? WRA-110, wra-113, wra-116, wra-119 single-channel, erbium-doped fiber amplifiers north america : 800 498-jdsu (5378) website : www.jdsu.com/waveready worldwide : +800 5378-jdsu
2 w ra-110, wra-113, wra-116, wra-119 amplification for extended reach and pre-amp application figure 1: power mask with noise figures 1 for WRA-110 figure 2: power mask with noise figures for wra-113 figure 3: power mask with noise figures for wra-116 figure 4: power mask with noise figures for wra-119 minimum power total power budget maximum rx distance C0 dbm 49 db 200 km 1 noise figures are maximum, eol values. wra-116 power mask -20 -15 -10 -5 0 5 10 15 20 25 -35 -30 -25 -20 -15 -10 -5 0 5 input power (dbm) o u t p u t p o w e r ( d b m ) nf = 5.3 d b nf = 6 .3 db nf = 8.5d b nf = 7 .5d b nf = 6.2d b nf = 6 .5d b wra-119 power mask -20 -15 -10 -5 0 5 10 15 20 25 -35 -30 -25 -20 -15 -10 -5 0 5 in put power (dbm) o u t p u t p o w e r ( d b m ) nf = 5.5d b nf = 6.0d b nf = 8.5d b nf = 7.5d b nf = 6.2d b nf = 6.5d b wra-113 power mask -20 -15 -10 -5 0 5 10 15 20 25 -35 -30 -25 -20 -15 -10 -5 0 5 in put power (dbm) o u t p u t p o w e r ( d b m ) nf = 8.5d b nf = 7.5d b nf = 6 .2 db nf = 5.5 db nf = 7 .3 db WRA-110 power mask -20 -15 -10 -5 0 5 10 1 5 2 0 25 -35 -30 -25 -20 -15 -10 -5 0 5 in put power (dbm) o u t p u t p o w e r ( d b m ) nf = 7.5d b nf = 6.2 d b nf = 6.4 d b nf = 8.5 db
specifications 3 w ra-110, wra-113, wra-116, wra-119 o ptical performance 1 parameter minimum typical maximum operating wavelength range 1530 nm 1563 nm input power range WRA-110 C3 dbm +3 dbm wra-113 C9 dbm +3 dbm wra-116 C0 dbm +3 dbm wra-119 C0 dbm +3 dbm total output power (user configurable in constant p out mode; 0.1 db set resolution) WRA-110 C0 dbm +10 dbm wra-113 C0 dbm +13 dbm wr a-116 C0 dbm +16 dbm wra-119 C0 dbm +19 dbm input los threshold configurable range C8 dbm 0 dbm (user configurable; 1.0 db set resolution) power measurement accuracy (all detectors) p C9 dbm C.7 db +0.7 db C9 < p C8 dbm C.5 db +1.5 db gain (user configurable in constant gain mode; 0.1 db set resolution) 7 db 26 db wr a-110 7 db 13 db wr a-113 7 db 19 db wr a-116 7 db 26 db wr a-119 7 db 26 db p olar iza tion dep enden t gain 0.3 db gain accuracy (relative to gain target, in constant gain mode) C.25 db +1.25 db g ain stabilit y (p eak-t o-peak, in constant gain mode) C.1 db 0.1 db n oise figur es see f igur es 1, 2, 3, and 4 polarization mode dispersion 0.5 ps r emnan t 980 t o output C0 dbm r etur n loss C0 db electrical specifications 2 parameter minimum typical maximum dc supply v oltage C8 v power dissipation 12 w 17 w alarm relay signals dry contact major and minor alarms. relay open under normal operation. r ela y closed when p ower is off. 1 unless otherwise stated, all specifications are end-of-life, across all temperature and input conditions. 2 electrical specifications assume installation in a waveready 3500f or 3100 shelf (dms-3500fse03 or dms-3100dc004).
north america : 800 498-jdsu (5378) website : www.jdsu.com/waveready worldwide : +800 5378-jdsu or der ing information w ra-110, wra-113, wra-116, wra-119 product specifications and descriptions in this document subject to change without notice. ?2009 jds uniphase corporation 30149178 001 0109 wra1xx.ds.cms.ae january 2009 specifications physical specifications parameter typical size (h x w x d) 17.27 x 2.54 x 22.35 cm (6.8 x 1.0 x 8.8 in) weight (approximate) 0.73 kg (1.6 lb) environmental specifications parameter minimum typical maximum normal operating temperature 0 c40 c extended operating temperature C c55 c storage temperature C0 c85 c relative humidity (non-condensing) 5% 90% interface specifications interface description optical lc/upc smf craft requires waveready 3100 or 3500f series shelf and a waveready com200 communications module. craft access through rs232/db-9 connector on front panel of com200 module. tl1/snmp requires waveready 3500f or 3100 series shelf and a waveready com200 communications module. tl1/snmp interfaces via the 10/100baset ethernet/rj45 connector on the front panel of a com200. f r on t panel six leds: card (power); maj/crit (major/critical alarm); min (minor alarm);tx and rx (port status), l aser on f or more information on this or other products and their availability, please contact your local jdsu account manager or jdsu dir ectly at 1-800-498-jdsu (5378) in north america and +800-5378-jdsu worldwide or via e-mail at customer.service@jdsu.com. product code description WRA-110 single-channel edfa, 10 dbm output wra-113 single-channel edfa, 13 dbm output wra-116 single-channel edfa, 16 dbm output wr a-119 s ingle-channel edf a, 19 dbm output associated parts dms-3100dc004 wr3100 1u shelf dms-3500fse03 wr3500f s helf com-200et003y com200 communication module
|
